Military Specification Sheet
MIL-S-19622/2C(SH)

Stuffing Tubes, 90 Degrees, Nylon

This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.

The requirements for acquiring the product described herein shall consist of this specification sheet and the issue of the following specification listed in that issue of the Department of Defense Index of Specifications and Standards (DODISS) specified in the solicitation: MIL-S-19622.

INCH-POUND
MIL-S-19622/2C(SH)
11 December 1992
DOWNLOAD:
SUPERSEDING
MIL-S-19622/2B(SH)
24 June 1986

FIGURE 1. Configuration


TABLE I. Size Selection
Tube
Size
PIN Packing
Assembly 2/
O-Ring 2/ Superseded
Part Number
1 M19622/2-001 M19622/16 MS28775-212 MS16163-1
2 M19622/2-002 M19622/17 MS28775-212 MS16164-2
3 M19622/2-003 M19622/18 MS28775-216 MS17271-3
1/ 4 M19622/2-004 M19622/19 MS28775-218 MS16165-4
4T M19622/2-005 M19622/19 MS28775-218 MS16165-4T
5 M19622/2-006 M19622/20 MS28775-226 MS16166-5
6 M19622/2-007 M19622/21 MS28775-230 MS16167-6

1/ Original size 4 is for replacement in existing installations only when size 4T does not fit.
2/ For information only, not to be furnished.

Revision letters are not used to denote changes due to the extensiveness of the changes.

AMSC N/A

FSC 5975

DISTRIBUTION STATEMENT A

Approved for public release; distribution is unlimited

 

Preparing activity: Navy - SH (Project 5975-N077-02)


Dorn Equipment Corporation
27 Upham Street • Melrose, MA 02176 • Tel: 781-662-9300 • Fax: 781-665-0180 • dornequipment.com
© MMXII Dorn Equipment Corporation • Web design by DreamLight.com