Military Specification Sheet
MIL-R-2726/13D(SH)

Receptacle, Cap Assembly, Electrical
(Symbol No. 1142.1)

This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification and the latest issue of MIL-R-2726.

INCH-POUND MIL-R-2726/13D(SH) 3 July 1986 DOWNLOAD: SUPERSEDING MIL-R-2726/13C(SHIPS) 1 March 1982

NOTES: Dimensions are in inches. Unless otherwise specified, tolerances are +/- 1/64 inch for fractions and +/- 0.005 inch for decimals. Angular tolerance is +/- 1/2 degree. Supersedes: Drawing 9000-S6202-73882, pc. 19, symbol 1142.

FIGURE 1. Dimensions and configuration. (D) denotes changes.

(D) REQUIREMENTS:

1. Dimensions and configuration: See figure 1.
2. Materials: Cap – polyamide (Nylon).
   
3. Design: As shown on the figure or may be multipiece design.
4. Safety cable: In accordance with MS17339.
5. Insert: Brass, commercial (COML).
6. Intended use: Maintains degree of enclosure when plug is removed in any application using receptacles MIL-R-2726/7 through MIL-R-2726/12 and enclosed receptacles MIL-R-2726/14 through MIL-R-2726/49.
7. Part number: M2726/13-001.

(B) QUALITY ASSURANCE:

Quality assurance shall be as specified in MIL-R-2726 and table I herein. The first article and quality conformance inspections shall consist of the inspections as specified in table 1, in the order shown .

Dorn Equipment Corporation
27 Upham Street • Melrose, MA 02176 • Tel: 781-662-9300 • Fax: 781-665-0180 • dornequipment.com
© MMXII Dorn Equipment Corporation • Web design by DreamLight.com